HI,Welcome toJiangsu Feiyue Bearings Co.,Ltd! 0523-83543427 0523-83543701

News center

Bearing wear

Time:2016-10-25 14:34:59 Author: Visits:

 If bearing wear to correct the problem? The following methods are described below:

(1) bearing mechanical equipment and technology better, more of the old Babbitt fusible line, casting, machining, grinding to repair again.

(2) use a metal spray gun to spray a new layer of alloy and restart the computer. But this method requires a dedicated spray gun, so there is not much use.

(3) non alloy melt on the other hand to the old line of welding and welding. This method is low cost and does not require special equipment.

Clean the bearing surface, the exposure of fresh alloy shine, put on the surface of the grease is strictly prohibited; when the solder, to prevent the thermal deformation of the end of watts, ceramic tiles can be placed on the welding in the cooling water tank




Prev:The outstanding advantages of bearing repair
Next:没有了! 返回

If you feel that the article is good, please share:
0755-29081727 0523-83543427 0523-83543701
mailbox
Online messageOnline message
wechat
在线咨询关闭
*
*
*
Please leave a real e-mail or telephone so that our staff can reply and answer in time!
*
can not see clearly? Click Refresh